Allen-Bradley Guard Master InStock@DubaiUAE TLS2-GD2 440G-T27127 safety switch (2) (Copy)
Allen-Bradley Guard Master InStock@DubaiUAE TLS2-GD2 440G-T27127 safety switch (3) (Copy)

Allen-Bradley Guard Master InStock@Dubai/UAE TLS2-GD2 440G-T27127 safety switch

PDFPrint
24V AC/DC, 3N/C + 2 NO, 3 X M20
Description

For sale is 1 Quantity of TLS-2 GD2 440G-T27127

Data at Manufacture site

440G-T Solenoid Interlock Switch Power to Lock 24 V ac/dc

 

RS Stock No.357-9199

BrandAllen Bradley Guardmaster Mfr. Part No.440G-T27127

 

Manufactured by GUARDMASTER LTD

TLS-2 GD2, POWER TO LOCK, 24V AC/DC, 3N/C + 2 NO, 3 X M20

 440G-T27127

24V AC / DC SER B

DL 14 99877-091

Allen-Bradley Guard Master TLS2-GD2 Safety Interlock Switch 24V AC/DC

----------------------------------------------------------

TLS2-GD2 | 440G-T27127  | 440G-T 27127 TLS-2 GD2 Power to Lock; 2 NC Safety contact; 1 NO Auxiliary contact; Solenoid contacts=1NC& 1 NO. ; Voltage 24V AC/ DC

-----------------

 

 

Type Contacts Solenoid Actuator Type Cat. No.
Safety Auxiliary Contacts Voltage Conduit Connector♣ 
M20 1/2 inch NPT Adaptor 12-Pin M23 8-Pin Micro (M12)∆ 
 
TLS-2 GD2 Power to Lock 2 N.C. 1 N.O. 1 N.C. & 1 N.O. 24V AC/DC 440G-T27127 440G-T27239 440G-T2NBBPH-1L
 
Product Details

 

TLS-GD2 Solenoid Interlock Switch, for Demanding Applications

The TLS-GD2 is a positive mode, tongue operated guard locking interlock switch that locks a machine guard closed until power is isolated and ensures that it remains isolated while the guard is open. The switch has three safety (N.C.) contacts and two auxiliary (N.O.) contacts. The head of this interlock switch has two entry slots and it can be rotated to provide four actuator entry points. A blanking plug is provided to seat the unused slot.
The guard may only be opened when a signal is applied to the TLS-GD2 internal solenoid which releases the lock mechanism. Therefore this solenoid interlock switch is ideal for machines which do not stop immediately or where premature interruption of the machine could cause damage to tooling and components or cause an additional hazard.
The safety switch is available in three types. The TLS-1 GD2 and TLS-3 GD2 incorporate a power-to-release function. Two manual release points with security screws allow the locked TLS-GD2 to be released in emergencies. An optional lid-mounted key-release style can also be supplied. The TLS-2 GD2 has a power-to-lock function. Each type of switch has five sets of contacts of various forms and are suitable for use with PLCs.
The TLS-1 GD2 and TLS-3 GD2 are both available with escape release options. They are intended for machine guarding with full body access. The switch is installed so that the escape release push button on the rear side is accessible from inside the hazardous area. This allows the intentional unlocking of the TLS-GD2 from inside a hazardous area, providing a means of escape for a person who may become trapped.
A stainless-steel actuator guide is fitted to protect the switch from actuator damage due to poor guard alignment or guard wear. TLS-GD2 has an ingress protection rating of IP69K making it suitable for harsh wash down applications as found in the food and beverage, pharmaceutical, solar and semiconductor industries.
TLS-3 specially designed to eliminate the problems of lockout when interfacing solenoid locking switches into dual channel safety relays.
Power-to-release or power-to-lock
High locking force £2000 N (450 lb)
Five contacts: 2 NC & 1 NO for door position monitoring 1 NC & 1 NO or 2 NC for lock monitoring
Rotatable head: 4 possible actuator entry positions
Lid mounted status indication
3 manual release points with security screws for use in the event of an emergency
IP69K, suitable for high pressure, high temperature, wash down
Key release lids available for unlocking the locking mechanism in emergencies

Note

Actuator is not supplied and must be ordered separately.

Standards

Conforms to EN 1088 & EN 60947-5-1.